Wallpaper Removal: Tips and Techniques
Back to Blog

wallpaper installation

Wallpaper Removal: Tips and Techniques

Wallpaper removal has a reputation as one of the most dreaded home improvement tasks — and in some cases, that reputation is deserved. But with the right tools, the right technique, and a realistic understanding of what you're working with, the process can be far more manageable than most people expect.

Know What You're Removing

The difficulty of wallpaper removal depends heavily on the type of wallpaper, the type of adhesive used, and the condition of the wall surface beneath. Modern non-woven wallpapers typically remove cleanly and dry in a single piece — simply score the edge, find a seam, and peel. Traditional paper wallpapers and older vinyl products are more challenging and usually require soaking with water or a removal solution to soften the adhesive before the paper can be peeled away. The worst-case scenario is old wallpaper that was installed directly over unprimed drywall — in this case, removing the paper often damages the drywall face, requiring significant repair work.

Tools and Solutions

For most removal projects, you'll need a scoring tool (used carefully to perforate the wallpaper surface without gouging the wall), a pump sprayer or sponge for applying water or removal solution, a wide plastic scraper for lifting the softened paper, and plenty of drop cloths to protect your floors. Commercial wallpaper removal solutions contain surfactants that help water penetrate the paper and adhesive more effectively than plain water alone. A wallpaper steamer is the most effective tool for stubborn installations, particularly on plaster walls, but requires care to avoid damaging the wall surface.

Preparing the Wall After Removal

Once the wallpaper is removed, the wall surface will almost certainly require some preparation before new wallcovering can be installed. Residual adhesive must be washed off completely — any remaining adhesive will prevent new wallpaper from adhering properly and can cause staining. Small tears and gouges in the drywall face should be repaired with joint compound and sanded smooth. The entire wall should then be primed with a wallpaper-specific primer before installation. Skipping the priming step is one of the most common mistakes in wallpaper installation and leads to adhesion failures and difficult future removal.

Ready to bring these ideas to life? Visit our showroom or get in touch.